PolySaw630/24
Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of bends, tees and other fabrications. Capacity 90 to 630mm OD / 3" to 24" IPS. Cutting an
Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of bends, tees and other fabrications. Capacity 90 to 630mm OD / 3" to 24" IPS. Cutting angle is -10 to +45 degrees. Lowering rate of saw is hydraulically controlled as are the strap clamps used to hold pipe segments in place. Saw blade made in Germany.
Read More REQUEST A QUOTE
SAFETY
Pipe saw specifically designed for the production of pipe segments used in the welding of PE and PP bends, tees, crosses and branch tees. Capacity 90 to 630mm OD / 3" to 24" IPS.
Standard Features
- Cutting range 90 to 630mm / 3" to 24" OD.
- 67.5 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees.
- Angular cutting error equal to or less than 1 degree.
- Speed of saw blade 195 m/min.
- Genuine 12 month international warranty.
- 400 volt 3 phase 50 Hz (3.7 kw 8.3 A). Alternatively 220 volt 3 phase 60 hz
- Weight 3,980kg
- Please note technical specifications of Worldpoly machines may change without notice


Technical Specifications
General
Cutting range 90 to 630mm / 3" to 24" OD. |
67.5 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees. |
Angular cutting error equal to or less than 1 degree. |
Speed of saw blade 195 m/min. |
Weight 3,980kg |
Please note technical specifications of Worldpoly machines may change without notice |
Warranty
Genuine 12 month international warranty. |
Electric
400 volt 3 phase 50 Hz (3.7 kw 8.3 A). Alternatively 220 volt 3 phase 60 hz |