Worldpoly PolyForce630i Tracked Fusion Machine. Designed and manufactured in Australia.
Arguably the fastest, safest, most consistent butt welding machine available. Thanks to years of research and development and Worldpolys' 60 years of PE pipeline
Worldpoly PolyForce630i Tracked Fusion Machine. Designed and manufactured in Australia.
Arguably the fastest, safest, most consistent butt welding machine available. Thanks to years of research and development and Worldpolys' 60 years of PE pipeline experience, every weld is the same. PolyForce630i Tracked gives you complete control over welding by virtually removing operator variables.
The standard machine includes:
Safety as first priority.
Two speed rubber tracks with cordless remote control.
Complete set of two-piece liners including ISO 630, 560, 500, 450, 400, 355, 315, 280 & 250mm or IPS 24", 22", 20", 18", 16", 14", 12" & 10".
External pipe lifters and multiple safety-stops for operator safety.
Facing tool, heating plate and main clamps cannot crash.
On-board data logging.
Hands-free clamping of pipe.
Low-noise 1800 RPM diesel.
Cordless remote.
PolyForce machines have 8 years of experience in Australias' heat and dust.
Worldpoly PolyForce630i Tracked.
High-pressure butt welding machine including on-board data logger, intuitive CNC controls, hydraulic facing tool and automatic changeover heating plate, hands-free hydraulic open/close/locking of pipe clamps, stub welding device and 4 circles of two-piece clamps 630mm to 250mm ISO or 24" to 10" IPS.
Tracked base includes low-noise 1800 rpm Yanmar diesel, external hydraulic pipe lifters and two-speed rubber tracks with cordless remote.
Capacity 250mm to 630mm OD. Includes two-piece clamp inserts for pipe and fittings diameters 630, 500, 450, 400, 355, 315, 280 and 250mm are included unless otherwise confirmed
Track mounted. Self contained and self propelled with cordless remote
CNC welding according to ISO 21307-17 Single High Pressure & ASTM F-2620
Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
Australian made and locally serviceable
Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
External hydraulic pipe lifters front and rear for operator safety
Industry Standard track assembly, Bridgestone specification rubber tracks, two-speed, automatic braking when stopped
Butt welding unit easily removed for site and trench work
Welded steel machine frame and tracked base with rated lifting points on welding machine and frame, optional spreader bar
Maximum pump operating pressure - 200 bar / 20 MPa
Engine - Yanmar 2216 cc, 4 cylinder, 70 litres, 1800 RPM low-noise diesel. Tier 4 for North America.
Weight - 3800 kg
Hydraulic
Total cylinder section - 3660mm², 7200mm² or 13,000mm²
Warranty
Genuine 3 year International warranty
Contact a distributor
Supporting poly welders in over 120 countries across the globe.