PolyForce630i Tracked

Worldpoly PolyForce630i Tracked Fusion Machine. Designed and manufactured in Australia. Arguably the fastest, safest, most consistent butt welding machine available. Thanks to years of research and development and Worldpolys' 60 years of PE pipeline

Read More REQUEST A QUOTE

SAFETY

Worldpoly PolyForce630i Tracked. High-pressure butt welding machine including on-board data logger, intuitive CNC controls, hydraulic facing tool and automatic changeover heating plate, hands-free hydraulic open/close/locking of pipe clamps, stub welding device and 4 circles of two-piece clamps 630mm to 250mm ISO or 24" to 10" IPS. Tracked base includes low-noise 1800 rpm Yanmar diesel, external hydraulic pipe lifters and two-speed rubber tracks with cordless remote.

Standard Features

  • PolyForce630i Tracked HDPE Fusion Machine - Australian Made from 60+ years of PE pipe experience
  • Track mounted. Self contained and self propelled with cordless remote
  • Genuine 3 year International warranty
  • CNC welding according to ISO 21307-17 Single High Pressure
  • Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
  • Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
  • Yanmar on-board, low-noise, low fuel consumption 1800 RPM diesel
  • Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
  • Locally serviceable
  • Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
  • External hydraulic pipe lifters front and rear for operator safety
  • Industry Standard track assembly, Bridgestone specification rubber tracks, two-speed, automatic braking when stopped
  • Butt welding unit easily removed for site and trench work
  • Long operating time thanks to 1800 RPM low-noise diesel - 12 hours under normal welding conditions
  • Australian made, built tough, locally serviceable, low-noise. Just what you've been looking for
  • Capacity 250mm to 630mm OD. Includes two-piece clamp inserts for pipe and fittings diameters 630, 500, 450, 400, 355, 315, 280 and 250mm are included unless otherwise confirmed
  • Welded steel machine frame and tracked base
  • Rated lifting points on welding machine and frame, optional spreader bar
  • Maximum pump operating pressure - 200 bar / 20 MPa
  • Total cylinder section - 3660mm2, 7200mm2 or 13,000mm2
  • Fuel capacity - 70 litres
  • Engine - Yanmar 2216 cc, 4 cylinder, 1800 RPM low-noise diesel. Tier 4 for North America.
  • Weight - 3800 kg
  • Technical specifications subject to change without notice. Please check at time of order confirmation.

Technical Specifications

General

PolyForce630i Tracked HDPE Fusion Machine - Australian Made from 60+ years of PE pipe experience
Track mounted. Self contained and self propelled with cordless remote
CNC welding according to ISO 21307-17 Single High Pressure
Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
Yanmar on-board, low-noise, low fuel consumption 1800 RPM diesel
Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
Locally serviceable
Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
External hydraulic pipe lifters front and rear for operator safety
Industry Standard track assembly, Bridgestone specification rubber tracks, two-speed, automatic braking when stopped
Butt welding unit easily removed for site and trench work
Long operating time thanks to 1800 RPM low-noise diesel - 12 hours under normal welding conditions
Australian made, built tough, locally serviceable, low-noise. Just what you've been looking for
Capacity 250mm to 630mm OD. Includes two-piece clamp inserts for pipe and fittings diameters 630, 500, 450, 400, 355, 315, 280 and 250mm are included unless otherwise confirmed
Welded steel machine frame and tracked base
Rated lifting points on welding machine and frame, optional spreader bar
Maximum pump operating pressure - 200 bar / 20 MPa
Fuel capacity - 70 litres
Engine - Yanmar 2216 cc, 4 cylinder, 1800 RPM low-noise diesel. Tier 4 for North America.
Weight - 3800 kg
Technical specifications subject to change without notice. Please check at time of order confirmation.

Warranty

Genuine 3 year International warranty

Hydraulic

Total cylinder section - 3660mm2, 7200mm2 or 13,000mm2

CONTACT A LOCAL DISTRIBUTOR