PolyForce24i HF Tracked

Worldpoly PolyForce24i HF Tracked Fusion Machine. Manufactured in Australia. Arguably the fastest, safest, most consistent butt welding machine available. Thanks to 5 years of research and development and Worldpolys' 60 years of PE pipeline experien

Read More REQUEST A QUOTE

SAFETY

Worldpoly PolyForce24i HF Tracked High pressure butt welding machine including on-board data logger, intuitive CNC controls, hydraulically movable facing tool and heating plate, hydraulic open/close/locking of pipe clamps, stub welding device and 4 circles of two-piece clamps 24" to 12" IPS and/or 22" to 12" DIPS. Tracked base includes low-noise 1800 rpm Yanmar diesel, external hydraulic pipe lifters and two speed rubber tracks with cordless remote.

Standard Features

  • PolyForce630i Tracked HDPE Fusion Machine - Australian Made
  • Track mounted. Self contained and self propelled with cordless remote and data logging
  • Genuine 3 year International warranty
  • CNC welding according to ISO 21307 Single High Pressure
  • Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
  • Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
  • Yanmar on-board, low-noise, low fuel consumption 1800 RPM diesel
  • Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
  • Locally serviceable.
  • Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
  • External hydraulic pipe lifters front and rear for operator safety
  • Industry Standard track assembly, Bridgestone specification rubber tracks, two-speed, automatic braking when stopped
  • Butt welding unit easily removed for site and trench work
  • Long operating time thanks to 1800 RPM low-noise diesel - 12 hours under normal welding conditions
  • Australian made, built tough, locally serviceable, low-noise. Just what you've been looking for
  • Capacity 250 to 630mm. Includes two-piece clamp inserts for pipe and fittings diameters 630, 500, 450, 400, 355, 315, 280 and 250mm are included unless otherwise confirmed
  • Welded steel machine frame and two-speed rubber tracked base
  • Rated lifting points on welding machine and frame, optional spreader bar
  • Maximum pump operating pressure - 200 bar / 20 MPa
  • Total cylinder section - 3660mm2, 7200mm2 or 13,000mm2
  • Fuel capacity - 70 litres
  • Engine - Yanmar 2216 cc, 4 cylinder, 1800 RPM low-noise diesel. Tier 4 for North America.
  • Weight - 3800 kg
  • Technical specifications subject to change without notice. Please check at time of order confirmation.

Technical Specifications

General

PolyForce630i Tracked HDPE Fusion Machine - Australian Made
Track mounted. Self contained and self propelled with cordless remote and data logging
CNC welding according to ISO 21307 Single High Pressure
Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
Yanmar on-board, low-noise, low fuel consumption 1800 RPM diesel
Simple operation. Automatic or manual butt fusion. 20,000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
Locally serviceable.
Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
External hydraulic pipe lifters front and rear for operator safety
Industry Standard track assembly, Bridgestone specification rubber tracks, two-speed, automatic braking when stopped
Butt welding unit easily removed for site and trench work
Long operating time thanks to 1800 RPM low-noise diesel - 12 hours under normal welding conditions
Australian made, built tough, locally serviceable, low-noise. Just what you've been looking for
Capacity 250 to 630mm. Includes two-piece clamp inserts for pipe and fittings diameters 630, 500, 450, 400, 355, 315, 280 and 250mm are included unless otherwise confirmed
Welded steel machine frame and two-speed rubber tracked base
Rated lifting points on welding machine and frame, optional spreader bar
Fuel capacity - 70 litres
Engine - Yanmar 2216 cc, 4 cylinder, 1800 RPM low-noise diesel. Tier 4 for North America.
Weight - 3800 kg
Technical specifications subject to change without notice. Please check at time of order confirmation.

Warranty

Genuine 3 year International warranty

Hydraulic

Maximum pump operating pressure - 200 bar / 20 MPa
Total cylinder section - 3660mm2, 7200mm2 or 13,000mm2

CONTACT A LOCAL DISTRIBUTOR