PolySaw1000/40 - Workshop Pipe Saws - Worldpoly

Workshop Pipe Saws

PolySaw315/12
(WJC315 90-315mm 3-12")
PolySaw630/24
(WJC630 90-630mm 3"-24")
PolySaw800/32
(WJC800 90-800mm 3"-32")
PolySaw1000/40
(40" 1000mm to 6" 168mm)
PolySaw1200/48
(WJC1200 630-1200mm 24"-48")
PolySaw1600/63
(WJC1600 630-1600mm 24"-63")
PolySaw1710/68
(WJC1720/68 630-1710mm 24"-68)
PolySaw2000/80
(1200-2000mm 48"-80")
PolySaw2500/100
(1600-2500mm 62-100")

PolySaw1000/40

PolySaw1000 band saw, capacity to 40" (1000mm) to 6" (168mm) IPS.
Cutting angle +45 to -10 degrees, allowing preparation of segments required for the production of bends, equal crosses, branch tees and y-branches from PE and PVC pipe.
Simple manual operation, package includes safety fence.

Technical Specifications

  • CE approved by SGS www.sgs.com
  • Genuine 24 month international warranty
  • Cutting range 6" to 40" IPS
  • +45 to -67.5 degrees cutting angle
  • Safety:
  • - Emergency stop at operation panel.
  • - All electric operating buttons and handles are operated at 24DCV.
  • - Before saw blade is running,it alarms with both a flashing light and audible alarm for a few seconds.
  • - Equipped with saw blade detection device. Once saw blade is broken, machine will stop immediately.
  • - Saw blade guides expand and contract automatically once pipe diameter and fitting types has been selected, assuring close contact with pipe for blade protection.
  • - Saw guide travel is limited by proximity switches.
  • - Pipe or fitting is locked by hydraulic controlled bar - easy, safe and reliable.
  • - Low pipe bed design, providing easy and safe reception of cut pieces.
  • Speed of saw blade 340 ft/min
  • 220 volt 3 phase 60 Hz. Alternatively 380/415 volt 3 phase 50 Hz
  • Weight 10,580 lb.
  • Dimensions 138" x 165" x 166"
  • Please note technical specifications of Worldpoly machines may change without notice. Please confirm at time of order.
Quote