PolyForce630/24 CNC Track - Field Welding Machines - Metric - Worldpoly

Field Welding Machines - IPS

PolyBasic 6"
(Low Pressure 2" - 6" IPS)
Worldpoly 8" High Pressure
(High Pressure 2" to 8" IPS)
Worldpoly 10" High Pressure
(High Pressure 3" to 10" IPS)
Worldpoly 16" High Pressure
(8" to 16" High Pressure)
PolyForce630/24 CNC Track
(12-24" IPS)
Worldpoly 24" Low Pressure
(10 - 24" IPS Low Pressure)
Worldpoly 36" Low Pressure
(18" - 36" IPS Low Pressure)
Worldpoly 48" Low Pressure
(24" to 48" IPS Low Pressure)
Worldpoly1400/54 HF
(32"-54" / 800-1400mm)
Worldpoly2500/100 Hydra LF
(64" - 100" IPS Low Pressure)

 

 


PolyForce630/24 CNC Track

Worldpoly PolyForce630/24 CNC Track Fusion Machine. Manufactured in Australia.


Arguably the fastest, safest, most consistent butt welding machine available. Thanks to 3 years of research and development with Bosch Rexroth and Worldpolys' nearly 60 years of PE pipeline experience, every weld is the same. PolyForce630/24 CNC gives you complete control over welding by virtually removing operator variables.

Includes all features in the PolyForce630 Trench, as well as:

Three speed rubber tracks.

Cordless and corded remote control.

External pipe lifters.

Technical Specifications

  • PolyForce630/24 Tracked HDPE Fusion Machine - Australian Made
  • Track mounted. Self contained and self propelled
  • Genuine 5 year International warranty
  • CNC welding according to the following Standards:
  • - ISO 21307-2011 Single Low Pressure
  • - ISO 21307-2011 Dual Low Pressure
  • - ISO 21307-2011 Single High Pressure
  • - POP003 Single Low Pressure
  • - POP003 Dual Low Pressure
  • - POP003 Single High Pressure
  • - DVS 2207-1-2007
  • - WIS 4-32-08 Single Pressure Welding
  • - WIS 4-32-08 Dual Pressure Welding
  • - WIS 4-32-08 UKWIR Fastweld
  • Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumables
  • Hydraulic open/close/locking of main clamps without operator contact. Impossible to crash main clamps with facing tool and heating plate.
  • Perkins on-board, low-noise, low fuel consumption 1500 RPM generator. 65 dB at operator position
  • Simple operation. Automatic or manual butt fusion. 5000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
  • Bosch Rexroth hydraulics - locally serviceable. Remote communication options using GSM, Satellite and Bluetooth. GPS compatible
  • Pipe clamps prevent slippage even under extreme conditions, which is detected by the machine in case of undersized pipe
  • External hydraulic pipe lifters front and rear
  • Italian track assembly, Bridgestone rubber tracks, three-speed, 30+ degree capacity, automatic braking when stopped
  • Butt welding unit easily removed for site and trench work
  • Long operating time thanks to 1500 RPM low-noise diesel - 18 to 25 hours under normal welding conditions
  • Built tough, locally serviceable, low-noise. Just what you've been looking for
  • Clamp options:
  • Capacity 225 to 630mm OD. Includes two-piece clamp inserts for pipe and fittings diameters 630, 560, 500, 450, 400, 355, 315, 280, 250 & 225mm, and stub device, are included.
  • Alternatively, capacity 8" to 24" IPS. Two-piece clamp inserts for pipe and fittings diameters 24", 22", 20", 18", 16", 14", 12", 10" & 8", and stub device, are included
  • Electric start with remote start and fuel gauge on operator side
  • Welded steel machine frame and tracked base
  • Wired remote control. Optional wireless remote with drop and tilt protection
  • Rated lifting points on welding machine and frame, optional spreader bar
  • Maximum pump operating pressure - 200 bar / 20 MPa
  • Total cylinder section - 3660mm2, 7200mm2 or 13,000mm2
  • Fuel capacity - 70 litres
  • Engine - Perkins 2216 cc, 4 cylinder turbo, 1500 RPM low-noise diesel
  • Weight - 3400 kg
  • Technical specifications subject to change without notice. Please check at time of order confirmation.
Quote